A Grid Tie Wind Turbine Inverter is a type of device that interfaces wind-generated electricity with existing electrical power from a public grid. These systems generate DC electricity from wind turbines, which are then converted to usable AC power by a utility-interactive inverter. As an example, a Wind Turbine Inverter can convert electricity generated by a 500w turbine into 2,000W of AC power.
This grid tie wind turbine inverter is designed for wind turbines that output 3-phase AC voltage. It maintains the rotation speed of the wind turbine and keeps the voltage from the wind turbine within the rated range of the grid tie inverter at all times. It also has high voltage protection, so it is very safe to use as the controller disconnects itself from the wind turbine when the wind is too strong and the load dump control system cannot maintain the output voltage from the wind turbine.
4 Models Available: 22V-65V Input Inverter with WIFI and Limiter , 22V-65V Input Inverter Limiter (Sensor) , 45V-90V Input Inverter with WIFI+ Limiter , 45V-90V Input Inverter Limiter (Sensor)
Features of the 1000W Grid Tie Wind Turbine Inverter
- Economical and easy installation
- Two Fan Cooling
- Directly connect to three phase wind turbine
- Much better output waveform compare with similar GTI
- Improving the efficiency of the entire solar power system
- Overload protection ,Anti-island protection
- Short-circuit protection/Reverse polarity protection
- AC output voltage and current THD<5%,PF>99%
We call the system combined with a small grid tie inverter and a wind turbine the “SGWT”. The system includes the wind turbine and the small grid-tie inverter and the installation kit. Some “SGWTs” also include the wind charge controller,and the load dump resistor.
The grid tie wind turbine inverters can be connected to any utility grid outlet in the house. The small grid tie inverter monitors the capacity, frequency and phase of the home grid power, then generates pure sine wave AC power with the same frequency and phase as the grid and slightly higher capacity than the grid, and then controls the power output to the grid based on current-controlled PWM.
The small grid-tie inverter only outputs power when the home grid is on. When the wind turbine spins and the output voltage is within the rated input voltage range of the inverter, the wind turbine generates power and the grid-connected inverter transfers the power from the wind turbine to the home grid.
When the total power of the appliances used in the house is greater than the output power of the inverter, this power from the inverter will be consumed inside the house, which will slow down the power meter; otherwise, the difference between the output power of the inverter and the total power used by the appliances will flow out from the house to the external grid.
Max. Power Output: 1000W
Input AC/DC Voltage Range: 22V~48V~60V~65V/ 45V ~ 90V
AC Output Voltage Range: 190VAC ~ 260VAC
Output Frequency: 46Hz~65Hz
Standby Power Consumption: <0.5W
Total Harmonic Distortion: <5%
Peak Inverter Efficiency: 92%
Power Factor: 0.99
Output Waveform: Pure Sine Wave
MPPT Efficiency: 99%
Overcurrent Protection: Yes
Over Temperature Protection: Yes
Reverse Polarity Protection: Yes
Anti-Island Protection: Yes
Weight ( Kg): 5.5kg/12LBs
Dimensions (W x H x D): 322*196*88mm