About BC200 Car Battery Charger
The BC200 Car Battery Charger is a versatile and fully automatic 12V charger for use with multiple battery types including Lead Acid, Cal, AGM, Gel Cell, and EFB batteries. The BC200 restores batteries to their original capacity, recovers slightly sulfated batteries, charges batteries in cold climates, rescues drained batteries, and provides maintenance charging to increase battery life. Suitable for most 12V battery capacities from 14-300Ah, such as Car, motorcycles, Auto, ATVs, UTVs, snowmobiles, jet skis, RVs, boats, trucks, Van, lawn mowers, and other vehicles. Additionally, this system conveniently and safely maintains battery charge during inactivity or while in storage while protects against short circuit and over-charging. Reverse polarity.
Recovery Features of BC200 Battery Charger
The bc200 12v battery charger and maintainer Using smart high and low-frequency pulse repair technology for under-voltage batteries, batteries with long idle time, and batteries that are won’t charge, with the repair features and activation effect, it can make your battery like new. When you have a dead battery, a battery charger can be a lifesaver, It uses a progressive recovery method to restore lost charge capacities in heavily sulfated batteries, which does more than just charge dead 12-volt batteries.
the BC200 Charger also can be deployed for a wide range of business application including 4S Store, Cars, Auto repair shop, and Communications Industry Battery, etc
when you face the under-voltage, Slow start and won’t charge battery problem, long idle vehicles, then you can rely on this battery charger to get them alive again.
Long-Term Stored Vehicles & Seasonal Equipment Need this 12V Charger
Stored batteries, including those used for seasonal equipment, will eventually lose power. When connected to a battery charger, you’ll keep it supplied with electricity. This is one of many things you’ll want to consider when storing vehicles. A battery charger provides an ideal boosting source, There is no need to drain a good battery to serve a weak one, especially when dealing with batteries in the winter.
7 Stage High-Frequency Pulse 4 Gear Adjustable
This Smart 12V Battery Charger offers exceptional versatility with 2/4/8/12 Amp charging featuring manual and automatic amperage selection, The Maximum high-frequency stage charger delivers 12 Amps. to meet varying requirements.
Overall Portable Design
this charge is designed with ABS flame retardant shell, it has flame retardant, anti-corrosion, and anti-electric shock features that To reduce the risk of corrosion and electric shock which ensures the safety of users and vehicles
Portable Car Battery Charger Cable
The BC200’s cables are 3.5 feet long, which means they can comfortably reach the battery connections. That said, the cables aren’t so long that they are a hassle to store, even in the built-in storage. So, while this isn’t as portable as one of the ultra-portable jump-starters that we reviewed, it won’t take up much space in your trunk.
this portable battery charger has a large LCD Display, As the battery charges, displays battery’s condition and charge progress on the LCD display. While not every battery charger on the market has a display.
8 Modes of The BC200 Charger
- Charge Mode
- Maintenance Mode
- Winter Mode
- Recovery (Repair) Mode
- Battery Capacity
- CCA Testing Mode
- Start Mode
- Alternator Output
8 advantages of this car battery charger you may like
the charge has a Built-in smart technology to ensure safe and stable operation, it’s an ideal battery charger while it’s Good-looking and also built with high-tech, 8 advantages you may like:
- 12V automatic identification
- Strong copper wire for output stability
- Intelligent protection with multiple protection systems
- Reverse connection protection
- Fast charging, high charging efficiency
- Good heat dissipation
- ABS flame-retardant shell
- Chip upgrade intelligent identification system
Battery Charger is a Smart Charger, it will Fully Charge and Maintain a Battery at Proper Storage Voltage without the Damaging Effects Caused by Trickle Chargers.
Ordinary cars and trucks generally need an automatic 12-volt car battery charger. These devices plug into the wall and clamp onto your battery with jumper cables. They then charge your battery to the optimum level before shutting themselves off.
this portable battery charger is only weighing 1.5kg and easy to carry on the truck, considering the weight and capability, it’s the best portable car battery charger on the market. Ideal to have on hand when another vehicle is not available. you can store in your glove box or other compartments.
The 7 Stage Battery Charging Process:
This Battery charger features a built-in microprocessor controller, It automatically detects the battery’s remaining charge capacity and adjusts the charge rate appropriately. making it a true 7 stage charger, fully automatic Plug and Run
Analyze – Test-Qualify/Accept or Reject battery, It automatically detects battery’s remaining charge capacity and adjusts the charge rate appropriately
Desulfate – Begins removal by dissolving harmful sulfate
Soft Start – Applies low current if battery tests low
Bulk* – Provides maximum output to charge to 85%
Absorption* – Provides low current to complete to 100%
Test – To determine if the battery needs further desulfation
Maintenance – Maintains temperature-compensated full-charge
this system conveniently and safely maintains battery charge during inactivity or while in storage while protects against short circuits and over-charging. Reverse polarity and back-feed protection feature helps
Multiple Protection of the Battey Charger
we always put your safety in the first place, all those protection allows you to stay safely connected 24/7:
Reverse protection – Automatically turn off the output when the positive and negative poles are reversed
Overheating protection – The charger automatically shuts down when the temperature is over 105°C/221°F
Short circuit protection – Automatically turn off the output when an unexpected short circuit occurs
Low voltage protection – The charger cannot start when the voltage is low voltage 10V
Overcurrent protection – When the fault current occurs, cut off the fault line.
Overvoltage protection – Automatically turn off the output when the fault voltage occurs
The safety features of the BC200 are excellent as well, which is more important than with jump-starters because chargers are left unattended for hours at a time. To avoid overcharging, this charger monitors the battery and charges only when the battery can be charged. This ensures that the battery doesn’t overheat. In addition, the reverse polarity protection feature ensures that you don’t damage the battery if you accidentally connect the clamps to the wrong connections – negative to positive or vice versa.
the BC200 works even in cold temperatures that make car batteries more susceptible to discharging. The BC200 also doubles as a mobile charging device with two USB ports. the USB Charger Perfect for Charging your iPhone, iPad, iPod, GPS, Camera or any Smartphone or Device that be Charged via USB,
How to use a 12V Car battery charger, Step by Step Guide.
For our example, we’ve condensed the instructions for a Brand New 6V/12V Automatic Battery Charger. Always follow the instructions provided by the manufacturer for your particular unit. Turn off the vehicle’s accessories, including the air conditioning, audio, and navigation systems, then disconnect plugged in electronics, such as your smartphone. Use eye protection and gloves. Locate the car battery and clean off the terminals with a rag. Make the connection. Ensure the charger is set to the “off” position. Attach the red (positive) cable on the charger to the red (positive post) on the car battery. Next, do likewise with the black (negative) cable, but DO NOT connect it to the battery post. Instead, connect it to any exposed bare metal section of the engine block. Then, connect the charger to an electrical outlet. Dial-in the amperage. Set the charger to the boost or charge position. The boost setting provides a slow trickle, controlled by a timer to deliver a full charge over time. The charge position supplies enough power to get your car quickly on the road again. Disconnect the charger. When finished, turn the charger off, remove the cord from the electrical outlet, then remove the black clamp from the engine followed by the red clamp before storing the unit.
Specifications of the BC200 Charger:
Input parameters: 220V-240V/110V-120V
Output parameter: 12V
Charging current: 12(A)
Product Certification: CE ROHS FCC SAA
User’s Guide Download
Download the user’s guide for the car battery charger to get the best use
BC200 Car Battery Charger Package:
1 12V Car Battery Charger
1 Clamps, Connectors
1 User’s Guide
best Car Battery Charger ever bought
Dustin Clayton –
thank you very good
Very good charger, charge my car quickly, but also to the phone charge, I really like it。
Michael D Smith –
worked perfectly!!! Great tool to carry in your vehicle charge
Good quality product. Holds charge for a long time