About Battery Equalizer 60V
The 60V Battery Equalizer (also called Battery Balancer) can connect Five 12V Battery by default, whether in series or parallel. The maximum compensation current is 10A.
Features of the Battery Balancer 60V:
Intelligent Battery Voltage Equilibrium System – Keep Batteries in Heath Condition to Prolong Battery Service Life
Intelligent Protection: Reverse polarity protection, Low Voltage Disconnect features to Protect the units during each state of charge soc
1 Set for 5 Batteries Bank Connection by Default (Max 12V + 12V + 12V + 12V + 12V Battery Bank)
Battery Equalizer is recommended for autos, boats, golf carts, motorcycles, solar, trucks, RV, electric forklift batteries, solar systems, and other battery groups. Configuration. It also can work when a battery charger is connected to the Battery.
More Battery Balancer for 24V,48V,60V,72V,96V Battery Bank Please Check the Battery Balancer Category
The principle of Batteries Cell Balancing:
The 60V Battery Balancer is Specialized to keep up the voltage balance of the connected Battery in series during the Charging and Discharge cycle. Differences in the chemical composition and temperature of the individual cells that are connected in series cause two battery charge and discharge differences even the Battery is idle, also due to the different levels of self-discharge could lead to an imbalance between serially connected Batteries at a charging process because there are differences, it could make a battery excessive charge or discharge, and the other one insufficient charging or discharging.
Battery equalizer 60v can compensate both parties when the Battery is connected in series as the voltage difference exceeds ten mV. Then the battery equalization starts to work. The final achievement is the passive balancing of the battery set. It can be connected for long periods to automatically battery state of equilibrium.
For more information, please check this battery equalization guide.
How to use the Battery Balancer
60V battery equalizer is suitable for Lead-acid Battery (VRLA), Lithium Iron Phosphate Batteries(LFP), Nickel Cadmium Secondary Batteries(Ni/CD), and Nickel-metal Hydride Secondary Batteries(Ni/MH) lithium-ion. It starts working when the voltage exceeds 2.4V, which means this equalizer can be used in a single-cell battery ranging from 2.4V to 12V.
One 60V equalizer can connect five batteries once at a time. If the battery-less than 5, the extra cable can be vacant (positive and negative terminals should be avoided), which does not affect the equilibrium effects. The equalizer is not affected by the battery connection way, whether in series or parallel. Both works.
60V Battery Balancer Specifications:
Battery nominal voltage: 5 × (2.4V/3.6V/6V/9V/12V)
Optimizing current: 0-10A
Quiescent current: 5mA(12V) 1.2mA(2.4V)
Dimensions: 66×128×44 mm 0.73kg/1.6lbs
Protection: Reverse polarity protection
Under-voltage lockout: 1.8V
1 ✖ 60V Battery Balancer
1 User Manual