Wind Turbine Inverter Grid Tie 2000W

This Wind Turbine Inverter Grid Tie Kit is designed for wind turbines that produce 3-phase alternating current and capable of feeding power back to the utility grid.

It maintains the wind turbine speed and keeps the wind turbine voltage within the grid tie inverter’s rated range at all times.

It also has high voltage protection which is very safe to use as the controller will disconnect itself from the wind turbine if the wind is too strong and the load dump control system cannot maintain the output voltage from the wind turbine.

Features of the Wind Turbine Inverter Grid Tie 2000W

• Economical and easy installation
• Two Fan Cooling
• Directly connect to three phase wind turbine
• Much better output waveform compared with similar GTI
• Improving the efficiency of the entire solar power system
• Overload protection, Anti-island protection
• Short-circuit protection/Reverse polarity protection
• AC output voltage and current THD<5%,PF>99%

We call the system combined with a small grid tie inverter and a wind turbine the “SGWT.” The system includes the wind turbine, the small grid-tie inverter, and the installation kit. Some “SGWTs” also have the wind charge controller and the load dump resistor.

The Wind Turbine Inverter Grid Tie can be connected to any utility grid outlet in the house. The small grid tie inverter monitors the capacity, frequency, and phase of the home grid power, then generates pure sine wave AC power with the same frequency and phase as the grid and slightly higher capacity than the grid, and then controls the power output to the grid based on current-controlled PWM.

The small grid-tie inverter only outputs power when the home grid is on. When the wind turbine spins and the output voltage is within the rated input voltage range of the inverter, the wind turbine generates power, and the grid-connected inverter transfers the energy from the wind turbine to the home grid.

When the total power of the appliances used in the house is greater than the output power of the inverter, this power from the inverter will be consumed inside the house, which will slow down the power meter; otherwise, the difference between the output power of the inverter and the total power used by the appliances will flow out from the house to the external grid.

Wind Turbine Inverter Grid Tie 2000W Specifications :

Max. Power Output: 2000W

Input AC/DC Voltage Range: 65V ~ 90V

AC Output Voltage Range: 190VAC ~ 260VAC

Output Frequency: 46Hz~65Hz

Standby Power Consumption: <0.5W

Total Harmonic Distortion: <5%

Peak Inverter Efficiency: 92%

Power Factor: 0.99

Output Waveform: Pure Sine Wave

MPPT Efficiency: 99%

Overcurrent Protection: Yes

Over Temperature Protection: Yes

Reverse Polarity Protection: Yes

Anti-Island Protection: Yes

Stackable: Yes

Weight ( Kg): 7.5kg/17LBs

Dimensions (W x H x D): 322*196*88mm

Grid Tie Wind Turbine Inverter Wiring System