the ZHCSolar BB01 is an advanced Multiple Voltage, 12 Amp MPPT Buck Boost solar charge controller and panel optimizer. It finds the TRUE MPPT or GLOBAL MPPT operating point and ignores the false maximum that occurs on partially shaded panels. This results in significant gains in charge current over competitors. Solar input operation extended from 24 to 72 volts regardless of battery voltage. it’s a great unit to charge solar drivered vehicles like solar golf carts and tribikes.
It can BOTH lower (Buck) and raise (Boost) Solar voltage to Battery voltage at very high efficiency over 99% peak.
Support Battery Type: Lithium-ion Battery, LiFePo4 Battery, Lead Acid Battery, Gel Battery, AGM Battery and etc.
Support Battery Voltage: 24V, 36V, 48V, 60V, 72V
Solar Panel Optimal Working Voltage: 15V-50V
The boost solar controller with OLED display function can clearly show the charging current, voltage, working temperature, and battery voltage of the solar system to keep track of the system operation.
OLED display advantages: high-definition, energy-saving, clear display in bright light or at night.
The boost controller with a key reset function, when an error occurs, uses the reset key to restart, easy to operate.
The solar booster is equipped with an intelligent Cooling Fan, The fan turns on automatically when the casing temperature exceeds 50°C/122°F. When the body temperature is lower than 50°C/122°F, the fan is automatically turned off. Reduce power consumption and improve efficiency.
The solar booster uses highly integrated premium chips, precision circuit boards, SMT chip processes to create high-quality Products.
This buck boost solar charge controller integrates multiple protection functions, including overcharge protection, overcurrent protection, reverse current protection, short circuit protection, reverse connection protection, and temperature protection, to ensure the safety of equipment and personnel use.
Features of the Buck-Boost Solar Charge Controller
System drive-by Solar Power generated from Panels.
Small Size: 4.4 x 3.4 x 1.6 inches (113 x 86 x 39 mm)
Under 1 pound (342 Grams)
Easy connection with only 2 wires in and out.
Works with Lithium Iron Phosphate or Lead-Acid Batteries.
Anti overcharge, anti overcurrent (12A), reverse current Protect, short circuit protection, temperature protection (over 90 ℃/194°F will intelligently reduce the charging current)
Toggle the plus and minus buttons to set the charging voltage, support lead-acid batteries, lithium iron phosphate batteries, ternary batteries
2 Year Limited Warranty / 40+ Year Design Life
Contact us for Volume Discounts of 10+ units.
Nominal Voltage: DC 12V-50V
Maximum Current: 12A
Rated Power: 18V/300W. 36V/450W
Battery Voltage: 24V/34V/48V/60V/72V
working Temperature: -20℃ ~ 60℃
1, strictly prohibit the use of over-voltage and over-power controller, only connect the battery does not connect the solar panel, the controller will not work.
2, before installing the controller, please confirm the voltage gear, must be consistent with the battery voltage, strictly prohibit high-grade voltage charging low grade battery.
3, installation steps: first connect the solar panel to the controller, then connect the battery. Controller input and output are red wire positive, black wire negative
4, the length of the wire connecting the controller as short as possible to reduce electrical losses
5, solar panels should be placed in the sun without any shaded place to use.
6, the controller will be hot during operation, it is recommended to install in a ventilated cooling environment.
7, copper wire is strictly prohibited instead of a fuse, controller fuse is 10A