About the 100 amp MPPT Solar Charge Controller
The 100 amp MPPT solar charge controller belong to the Latest EPever MPPT controller Tracer AN series, the MPPT controller based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design, has the features of high response speed, high reliability, and high industrial standard.
the MSRT can guarantee very high conversion efficiency in any charging power, which sharply improves the energy efficiency of the solar system; Advanced MPPT control algorithm minimize the maximum power point loss rate and loss time, to ensure the tracking efficiency, corresponding speed as well as high conversion efficiency under high or low power, so that in any situation, Tracer AN MPPT solar charge controller products can rapidly track the maximum power point(MPP) of PV array to obtain the maximum energy of the panel.
The limitation function of the charging power and current, and automatic power reduction function fully ensure the stability when works with oversize PV modules and operate under a high-temperature environment.
With the adaptive 3 stage charging mode based on the digital control circuit,
Tracer AN 100 amp Mppt Solar Charge Controller can effectively prolong the life-cycle of battery and significantly improve the system performance. The load, utility or generator auto-control relays make it easy to compose the hybrid power system. All-around electronic protections, including overcharging, over discharging, and PV reverse polarity protection, effectively ensure the safer and more reliable operation of the solar system for longer service time.
The isolated RS485 interface with standard MODBUS communication protocol and 5V power supply makes it easy for the customer to expand the application, it supports up to 8 charging in parallel to expand the system and meet with different monitoring requirements, so that can be widely used for various applications, e.g. solar RV, household system and field monitoring, etc.
Models of 100 Amp MPPT Solar Charge Controller
Tracer10415AN, 150V PV Input Max. 48V 36V 24V 12V System Auto Switch
Tracer10420AN, 200V PV Input Max. 48V 36V 24V 12V System Auto Switch
The feature of 100 Amp MPPT Solar Charge Controller
CE certification (LVD EN/IEC62109, EMC EN61000-6-1/3)
High quality & low failure rate components of ST and Infineon to ensure the product’s life
Advanced MPPT technology & ultra-fast tracking speed, with tracking efficiency no less than 99.5%
Maximum DC/DC transfer efficiency is as high as 98.6%★, full load efficiency is up to 98%★
Advanced MPPT control algorithm will minimize the MPP loss rate and loss time
The accuracy of the recognition and tracking at the highest point of multiple-peaks MPP
The wider range of MPP operating voltage
The auto control system to limit the charging power & current go over the rated value
Support 4 charging options: Sealed, Gel, Flooded and User
Battery temperature compensation function
Real-time energy recording and statistical function
Automatic over-temperature power reduction function
Hundred percent full load operation in the working environment temperature range within charging & discharging
Support up to 8 units in parallel to expand solar system
Load relay control external load switch signal to realize diversified load work modes
The first and the second disconnection of load control, contain two relay’s contact
Auto-control of utility and generator relay design
Utility or generator auto-control relays make it easy to compose the hybrid power system
The remote temperature and the voltage sensor design will collect accurate data of battery temperature and voltage
Isolated RS485 with 5VDC/200mA to protect output for no power devices with MODBUS protocol
To monitor or set the parameters by using the phone Apps or PC software
★Tracer10415AN@48V system
