Waterproof IP68 LED 10A/20A PWM Solar Panel Charge Regulator Controller 12-24V Auto Switch Timer with Auto,Manua,Debug Mode

Waterproof IP68 LED 10A/20A PWM Solar Charge Controller 12-24V Auto Switch Timer
Features:
1. 12V/24V Auto Adapt LED Display Solar Panel Charge Regulator Controller for Home PV System.
2. Build-in industrial micro controller, auto adapts to the Voltage of 12V/24V.
3. Auto Mode, turn on the lights when there is no sunlight, turn off the lights when there is sunlight.
4. Also with Manual Mode to turn on/off the lights depends on your needs.
5. Can preset the lighting hours from 1-15 hours.
Debug mode for checking correctness of the system.
6. Smart Fully 3-stage PWM charge management.
7. With over-charge protection, over-discharge protection, overload protection, short circuit protection and reverse connection protection.
8. With TVS Lighting Protection.
9. Application: Home, Industrial, Commercial.

Specifications:
Model: CMWD Series
Rated Voltage: 12V/24V
Rated Current: 10A, 20A (Optional)
Discharge Current: 10A, 20A (Optional, equal to the rated current)
Max. PV Voltage: 55V
No Load Loss: = Temperature Compensation: -4.0mV/cell/°C
USB Output: 5V/2A Max.
Equal Charging Voltage: 14.4V/28.8V
Boost Charging Voltage: 14.6V/29.2V
Float Charging Voltage: 13.8V/27.6V
Over-Discharging Voltage: 10.8V/21.6V
Working Temperature: -35°C to +65°C
Waterproof Grade: IP68
Working Modes: Auto Mode, Manual Mode, Timer Mode, Debug Mode
Dimension: approx.104.4 x 80 x 28.3mm / 4.1″ x 3.1″ x 1.1″
Installation Dimension: approx.95.4 x 50mm/3.75 x 1.96”

Note:
Please allow 1-3cm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.

 

1 x Solar Charge Controller
1 x English User Manual