This all-new MPPT Wind Turbine Charge Controller 48V 24V 12V Auto allows you to always have perfect control over your Wind Turbine system from wherever you are and maximizes its performance. The MPPT Technology enables harvest the most power from wind generator.
This wind charge controller is able to handle 400W,500W,800W to 1000W wind turbine power input, it auto detects the battery voltage no matter is 48v, 24V or 12V, and switch to best charge voltage.
the wind generator charge controller has a built-in boost function, which solves the problem of small wind turbine not charging under low wind speed.
It adopts intuitive LED lights to indicate the system and charge status.
This wind charger combines compact design with good heat dissipation, and is widely applicable to marine, vehicles, street lamps, household, monitoring system, small mobile base stations and other places where wind turbines are installed.
The controller is compatible with 3 phase, single-phase and DC Wind Turbines on the market.
This latest addition to the FWC48 wind mppt charge controller combines all the best of connectivity, redefining smart wind turbine power solutions in every way.
MPPT Wind Turbine Charge Controller Features:
1. the wind charge controllers has overcharge, over discharge and overload protection.
2. the wind generator controller protect the battery by power-off protection, brake protection and anti-reverse charging.
3. User programmable.Including transmission voltage points, boost points and other parameters.
4. Suitable for: fishing boat, street lights, home, monitoring, small mobile base station, etc.
5. Improved three-stage charging algorithm to effectively prevent battery un-equalizing and vulcanization and improve battery life.
6. The breeze starts function, activated the wind turbine dormant state under the low wind speed.
MPPT Wind Turbine Charge Controller Specification:
Condition: 100% Brand New
Rated Voltage: 12V / 24V / 48V
Rated Power: 400W / 800W / 1000W
Battery Protection: 15V / 29V / 58V
Temperature Compensation: 8mV / ℃ / 2V () -20 ~ 65 ℃
Working Temperature: -20 ~ + 55℃ 35 ~ 95% RH (no dew)
Storage Temperature: -30 ~ + 65℃
Use : ≤ 5500M
Size: Approx. 18.1 * 7.7 * 5cm / 7.13 * 3.03 * 1.97in
Weight: Approx. 464g / 16.4 oz
MPPT Wind Generator Charge Controller Installation:
1. Connect the battery’s positive and negative electrode interface refer to user manual.
2. Green LED indicator lights up indicated the wind system is working properly.
3. The red LED indicator lights up indicates the battery is full or the controller is in emergency braking mode.
4. it has emergency brake switch, switch “one” make the system to the emergency braking state, the red LED will be lit at the same time, if is in the “0” state, the controller is in the normal working state.
1 * Wind Charge Controller