Battery Balancer 60V

About Battery Equalizer 60V

The 60V Battery Equalizer (also called Battery Balancer) can connect Five 12V Battery by default, no matter in series or in parallel. the maximum compensation current is 10A. For 96V or higher voltage Battery pack, multiple 48V equalizers can be connected in parallel.

Features of the Battery Balancer 60V:

Intelligent Battery Voltage Equilibrium System – Keep Batteries in Heath Condition to Prolong Battery Service Life

Intelligent Protection: Reverse polarity protection, Low Voltage Disconnect features to Protect the units during each state of charge soc

1 Set for 5 Batteries Bank Connection by Default (Max 12V + 12V + 12V + 12V + 12V Battery Bank)

Battery Equalizer is recommended for use in autos, boats, golf carts, motorcycles, solar, trucks, RV, electric forklift batteries, solar system, and any other battery groups Configuration. also can work when there is a battery charger connected to the battery.

More Battery Balancer for 24V,48V,60V,72V,96V Battery Bank Please Check the Battery Balancer Category

The principle of Batteries Cell Balancing:

the 60V Battery Balancer is Specialized for keep up the voltage balance of connected battery in series during the Charging and Discharge cycle, due to differences in the chemical composition and temperature of the individual cells that connected in series, It causes two battery charge and discharge differences even the battery is idle, also due to the different levels of self-discharge could lead to an imbalance between serially connected battery at a charging process, because there are differences, it could make a battery excessive charge or discharge, and the other one insufficient charging or discharging.

battery equalizer 60v can compensate both parties when the battery is connected in series as voltage difference exceeds 10 mV, then the battery equalization starts to work, Final achieved the passive balancing of the batteries set. It can be connected for long periods for automatically battery state of equilibrium.

For more information, please check this battery equalization guide

How to use the Battery Balancer

60V battery equalizer is suitable for Lead-acid Battery (VRLA), Lithium Iron Phosphate Batteries(LFP), Nickel Cadmium Secondary Batteries(Ni/CD), and Nickelmetal Hydride Secondary Batteries(Ni/MH) lithium ion. It starts work when the voltage higher than 2.4V, it means that this equalizer can be used in a single cell battery range from 2.4V to 12V.

One 60V equalizer can connect 5 batteries once a time, if battery less than the 5, the extra cable can be vacant (positive and negative terminal should be avoided), does not affect the equilibrium effects. The equalizer is not affected by battery connection way, no matter in series or in parallel, both works.

60V Battery Balancer Specifications:

Battery nominal voltage: 5 × (2.4V/3.6V/6V/9V/12V)

Optimizing current : 0-10A

Quiescent current: 5mA(12V) 1.2mA(2.4V)

Dimensions : 66×128×44 mm 0.73kg/1.6lbs

Protection: Reverse polarity protection

Under voltage lockout: 1.8V

Balancer Packing:

1 ✖ 60V Battery Balancer

1 User Manual