EPever Upower Inverter Charger 2 In 1

EPever Upower Intro

The EPever UPower Inverter Charger series is a new type of the hybrid inverter/ MPPT charger combining with solar & utility charging and AC output, which adopts a multi-core processor design and advanced MPPT control algorithm, and has the features of high response speed, high reliability, and high industrialization standard. It offers four charging modes to Solar priority, Utility priority, Solar and Utility & Solar; two output modes for Battery and Utility, meeting the various application demands.

The up-to-date optimized MPPT tracking technology is adopted for the PV charging modules. It can quickly track the maximum power point of the PV array in any environment and acquire the maximum energy of solar panel in real-time;

The advanced control algorithm is adopted for AC-DC charging modules that realize fully digitalized double closed-loop control for voltage and current, with high control precision, small volume. The input range of AC voltage is wide, the output DC charging voltage/current is continuously adjustable in a certain range, and the complete input/output protection functions can offer stable and reliable charging and protection for the battery.

The DC-AC inverter modules are based on full digital and intelligent design. It adopts the advanced SPWM technology, outputs the pure sine wave and converts 24/48VDC to 220/230VAC suitable for AC loads of household appliances, electric tools, commercial units, electronic audio, and video devices etc.

The product adopts 4.2 inch LCD display design, which real-time displays the operational data and running state of the system. The comprehensive electronic protection function guarantees a safer and more stable operation of the solar power system.

EPever Upower Highlights

A new type of all-digital intelligent energy storage and management Inverter/charger

MPPT technology, Max. tracking efficiency 99.5 %, Max. DC-DC conversion efficiency 98.5 %

Advanced all-digital control technology for AC-DC charging modules

SPWM technology, with high efficiency up to 95 %

With the function of Utility & Solar charging ratio selection, and total charging current setting

Rich set of options

RS485 isolated communication interface with standard Modbus protocol

Extensive electronic protections

Variety of accessories can be selected according to user’s requirements

Four charging mode: Solar priority, Utility priority, Utility & solar and Solar only

Two OUTPUT mode: Battery and Utility

LCD design that enables dynamic display of system running data and operating state

Provided with a common interface and advanced interface

Multiple LED indicators that instantly indicate the operating state of the system

2P circuit breaker provided at the utility input end

Independent control of AC output by AC OUT button

Battery temperature compensation function.

Inverter Charger Figure of EPever Upower

 

 

Inverter Charger Wiring Diagram

How to Set the Upower Inverter Charger

Specification of EPever Upower Inverter Charger

Item	UP3000-M3322	UP3000-M2142
System battery voltage	24VDC	48VDC
Battery input voltage range	21.6~32VDC	43.2~64VDC
Inverter output
Continuous output power	2400VA	2400VA
Output power (15min.)	3000VA	3000VA
Overload power(5s)	4800VA	4800VA
Max. surge power	6000VA	6000VA
Output voltage range	220VAC±3%
Output frequency	50HZ/60HZ
Output wave	Pure Sine Wave
Power factor	0.8
Distortion THD	≤3%(24V,,4V or 48V resistive load)
Inverter efficiency	≤95%
Utility input
Utility input voltage range	170VAC~275VAC
Utility charge current	30A	15A
Transfer time	20mS
Solar charging
Max. PV open circuit voltage	100V	150V
Max. PV input power	780W	1040W
PV charging current	30A	20A
Equalization voltage	29.2V	58.4V
Boost voltage	28.8V	57.6V
Float voltage	27.6V	55.2V
Tracking efficiency	≤99.5%
Charging conversion efficiency	≤98%
Temperature compensate coefficient	-3mV/°C/2V (Default)
Others
No-load consumption	≤0.8A	≤0.6A
Enclosure	IP30
Relative humidity	< 95%(N.C.)
Working environment temperature	-20°C~50°C(100% input and output)
Mechanical Parameters
Dimension	444×300×126mm
Mounting dimension	230mm
Mounting hole size	Φ8mm
Weight	9.2kg

Inverter Charger Manual Download

Download the user manual for the upower at the download center