Battery Balancer 96V


96V Battery Balancer
Battery Balancer 96V $309.00 $169.00

Battery Balancer 96V HA03 Intro

Ha03 96V Battery Balancer is specialized for keeping the voltage balance of batteries connected in series while charging and discharging.

Due to the differences in chemical composition and temperature of the battery cell connected in series, it causes two battery charge and discharge differences even when the battery is idle, also due to the different levels of self-discharge could lead to an imbalance between serially connected batteries at a charging process, because there are differences, it could make one battery excessive charge or discharge, and the other insufficient charge or discharge. 

As the charge-discharge process repeat, this difference will gradually strengthen, eventually leading to premature battery failure.

HA03 battery Balancer can compensate both parties when the battery is connected in series as the voltage difference exceeds ten mV. The battery equalization starts to work, and Final achieved the balance of the battery set. 

It can be connected for long periods to automatically battery state of equilibrium.

HA03 battery equalizer is suitable for lead-acid batteries(VRLA), lithium iron phosphate batteries(LFP), nickel-cadmium secondary batteries(Ni/CD), and nickel-metal hydride secondary batteries(Ni/MH). It starts working when the voltage is higher than 2.4V, which means that this equalizer can be used in a single-cell battery ranging from 2.4V to 12V. One equalizer can connect eight batteries once at a time. If the battery is less than 8, the extra cable can be vacant (positive and negative terminals should be avoided), which does not affect the equilibrium effects. The equalizer is not affected by the battery connection way. No matter whether in series or in parallel, both can work.

HA03 96V Balancer Wiring DiagramHA03 96V Balancer Wiring Diagram
HA03 96V Balancer Wiring Diagram

Specification of Battery Balancer 96V

Battery nominal voltage: 8×(2.4V/3.6V/6V/9V/12V)

Optimizing current: 0-10A

Quiescent current: 5mA(12V) 1.2mA(2.4V)

Dimensions: 5.5×4.13×2.48 Inch

Protection: Reverse polarity protection

Under voltage lockout: 1.8V

More Battery Balancer for 24V,48V,60V,72V,96V Battery Bank Please Check the Battery Balancer Category

ha03 96V Battery Balancer in Use
ha03 96V Battery Balancer in Use

How to Connect the 96V Battery Balancer

Please refer to this guide for connecting the battery balancer 

Additional information

Weight 1.5 lbs


There are no reviews yet.

Be the first to review “Battery Balancer 96V”