30A Solar Charge Controller Intro
Features of this 30a solar charge Controller
This 30 Amp Solar Charge Controller is a 12V 24V Automatically Identicafation Smart Charging Regulator and has a 5V USB Output Port for Phone and other electrics Device Charging.
The PV Max. Input Voltage is 55V and Max Panel Input Power is 450W for 12V Battery System, 900W for 24V Battery System.
This 30A Solar Controller support Optional sealed, gel, open lead-acid batteries and lithium battery charging program
This controller uses Upgrade 3-stage PWM charging algorithm, over-discharge or regular battery equalization charge, effectively prevent the battery from the unbalanced or curing phenomenon, effectively extend the battery life (colloidal, lithium batteries excluded).
This controller has a rich load mode, easy to use in a variety of street lights and monitoring equipment. and the temperature compensation Function can automatically adjust charging parameters (except for lithium batteries).
The HP3024 has Mulitple-Protection: With overcharge, over discharge, overload protection, electronic short circuit protection,anti-reverse connection protection, and TVS lightning protection
the advanced load starts methods capable of starting a large capacitive load.
the overall Industrial design can be used in a variety of harsh environments.
Provide rich parameter settings and power-down save function, no need to repeat settings.
Graphic dot matrix Display and Simple 2-button Human-machine interface operation.Humanized browsing design, dynamic interface, convenient and intuitive operation.
(optional communication function) provides RJ12 data interface (the output can be TTL232 level or Bluetooth communication), the data using standard Modbus protocol, compatible with our PC monitoring software or mobile APP software.
Technical Speciations of 30a solar charge controller
Rated Current: 30A
Rated Input Power: 12V/450W,24V/900W
No Load Loss: < 13mA/12V,< 15mA/24V
PV Input Voltage:<55V
Battery maximum allowable voltage:<34V
Charge return voltage 13.2V
Over discharge return voltage 12.5V (settable)
Over discharge voltage 11.0V (settable)
Light Control Voltage: light control on 5V, light control off 6V (light control on +1V).
Light control recognition time: 10 minutes
Terminal: 10AWG Cable
D. Edwards –
I like this much better than the charge controller I had
It seems to be working fine
It was easy to install, easy to understand
Easy to use, Display is helpful and easy to read.fits my 8 AWG wire no problem
Works without any problem.
Johanna S. –
This is a great solar charge controller for this price range. The display indicates the state of the battery
I like this one.
old joe –
Joseph Languell –
Fit my needs at this time
Much better than what we had and does the job fine
easy to hook up and works great.
Carole Thompson –
Best product I have ever bought
easy to set up it.
This charge controller is doing exactly what I purchased it to do. I like the display and find it very informative.
Awesome controller for the price.
Peter Tim –
Works great. Gives me more info about what’s going on.
Perfect for my Solar Power System
mike n. –
John T –
compact but works good
great product for solar panel
This charge controller is perfect
It gives all the necessary readings of Amps and voltage. I highly recommend this product.
did a great job